WhatsApp
+55 11 3601-5700 +55 11 9 9150-9044
home / Produtos / Papel e Cartão /

Papel e Cartão

Abaixo são apresentados todos os produtos comercializados pela REGMED.

The Formation Sensor from Techpap is the state-of-the-art solution to replace traditional evaluation of formation of papers and boards, done visually by skilled analists, a non-quantitative and oldfashioned subjective method.
Analogic sensor that uses modern and safe optoelectronic components especially selected, detecting any crack, also folded edges of a moving web, thin or thick, dark or clear.
The uniqueness of the FDA resides in its handsheet formation principle which is completely different from classic handsheet formers. In fact, the FDA uses a process very similar to industrial PM sheet production.
Accurate measurement of ink, dirt, shives and stickies SIMPALAB is a laboratory sensor dedicated to an accurate dirt counting on: – a sheet of paper (by reflected light) – a handsheet (by reflected or transmitted light)
The Pulmac Automated Z-Span™ Tester offers an automated zero span and short span testing capability. Once the sample handsheets or strip are loaded onto the feed tray, 24 wet/dry, zero/short span tests are executed during a five minute testing sequence. Following termination of the testing sequence, test results are displayed on the operator interface terminal […]
The Z-Span™ manual bench-top tester measures zero span and short span tensile strength with individually loaded handsheet or machine-made paper samples. The Z-Span™ Tester generates individual tensile readings from prepared test strips. The Dial-a-Gap attachment facilitates testing at multiple spans from 0.2 mm to 0.6 mm. The Wet Testing Kit supports sample preparation and testing […]
Printability tester to produce colour prints with conventional and UV offset inks.
Printability tester for flexo inks, can also be used for gravure prints, performed with anilox and photopolymer cleaning mode.
The IGT Gloss Meter G60 is a handheld device to measure gloss values under a 60° angle; the G75 is a version for the 75° TAPPI method. The IGT Gloss Meter G268 is able to do measurements in 3 different angles in one measurement.

Tem interesse?
Solicite um orçamento!

Quero solicitar um orçamento