The Falling Dart Impact Tester covers the determination of the energy that causes Polyethylene Film to fail under specified conditions, with the impact of a free-falling dart. This energy is expressed in terms of weight (mass) of the dart falling from a specified height, which would result in 50% failure of specimens tested.
Gelbo Flex Tester is used to determine whether certain laminations of plastic withstand repetitive strain. By attaching sample pieces of laminated plastic to the two circular clamping disks, via hose clamps, the specimen is twisted and turned to the specific movements. This process will show a visual result of pinholding and delamination.
The Melt Flow Indexer is a dead-weight extrusion plastometer. It consists of a thermostatically controlled melting chamber (the barrel) in which the polymer under test is heated and from which it is extruded through a standard die under standard conditions of load, which is made up of the combined weights of the extrusion piston and […]
The PEBT-4000 PET Bottle Pressure Tester is an advance testing equipment specialized for testing the PET bottles. It has been designed in conformity to the three international commonly used testing methods: (1) Ramp Fill Mode; (2) Burst Mode; (3) User-Defined Mode.
The Melt Flow Indexer is designed to determine the MVR and MFR of thermoplastic as well as test the high melt temperature such as PC, Fluor plastics and nylon, but also PE, PP, POM,PS,ABS resin which has low melt temperature.