The uniqueness of the FDA resides in its handsheet formation principle which is completely different from classic handsheet formers. In fact, the FDA uses a process very similar to industrial PM sheet production.
Analogic sensor that uses modern and safe optoelectronic components especially selected, detecting any crack, also folded edges of a moving web, thin or thick, dark or clear.
The Pulmac Automated Z-Span™ Tester offers an automated zero span and short span testing capability. Once the sample handsheets or strip are loaded onto the feed tray, 24 wet/dry, zero/short span tests are executed during a five minute testing sequence. Following termination of the testing sequence, test results are displayed on the operator interface terminal […]
The Formation Sensor from Techpap is the state-of-the-art solution to replace traditional evaluation of formation of papers and boards, done visually by skilled analists, a non-quantitative and oldfashioned subjective method.
The Z-Span™ manual bench-top tester measures zero span and short span tensile strength with individually loaded handsheet or machine-made paper samples. The Z-Span™ Tester generates individual tensile readings from prepared test strips. The Dial-a-Gap attachment facilitates testing at multiple spans from 0.2 mm to 0.6 mm. The Wet Testing Kit supports sample preparation and testing […]
The StickyScan 200E™ is designed to be an accessory to the Pulmac MasterScreen™ to generate measurements of stickies. The Pulmac MasterScreen™ will deposit concentrated contaminants onto a 22 cm diameter filter paper. These contaminants can be transformed to stickies measurement using several test methods including: Laminator, TAPPI, and INGEDE.
Pulmac’s PSE System™ offers a complete Z-Span™ technology package in one compact and highly automated system. Any pulp or stock sample is first prepared at the PSE System’s work station. The resulting slurry is then poured into the sheet former reservoir and 8 minutes after activation, 6 sample sheets are automatically delivered, ready to be […]
The MasterScreen™ is a low consistency screening device designed to mechanically separate fibers from contaminants, including stickies, dirt, shives, vessel cell elements, plastics and hot melts. Contaminants are deposited automatically onto a filter paper for display and analysis.
Fale conosco+55 11 3601-5700Envie um e-mailregmed@regmed.com.brLocalizaçãoAv. Dr. Alberto Jackson Byington, 1595, Industrial Anhanguera - CEP 06276-000 - Osasco - SP - Brasil
