Analogic sensor that uses modern and safe optoelectronic components especially selected, detecting any crack, also folded edges of a moving web, thin or thick, dark or clear.
Accurate measurement of ink, dirt, shives and stickies SIMPALAB is a laboratory sensor dedicated to an accurate dirt counting on: – a sheet of paper (by reflected light) – a handsheet (by reflected or transmitted light)
The IGT Gloss Meter G60 is a handheld device to measure gloss values under a 60° angle; the G75 is a version for the 75° TAPPI method. The IGT Gloss Meter G268 is able to do measurements in 3 different angles in one measurement.
Dedicated tester to produce colour prints of conventional and UV offset inks. Also available in a version with a 3-position printing shaft for three densities of three colours on the same strip.
The Pulmac Automated Z-Span™ Tester offers an automated zero span and short span testing capability. Once the sample handsheets or strip are loaded onto the feed tray, 24 wet/dry, zero/short span tests are executed during a five minute testing sequence. Following termination of the testing sequence, test results are displayed on the operator interface terminal […]
The Z-Span™ manual bench-top tester measures zero span and short span tensile strength with individually loaded handsheet or machine-made paper samples. The Z-Span™ Tester generates individual tensile readings from prepared test strips. The Dial-a-Gap attachment facilitates testing at multiple spans from 0.2 mm to 0.6 mm. The Wet Testing Kit supports sample preparation and testing […]
